Products

MVR Vaporiser

Turnkey Solution provider of waste water purification and recycling Mizu mastered the art of Industrial waste water (Effluent) purification, separation of dissolved solid matter and up to 99% recycling of purified water of absolutely low TDS in process. This makes industry in category of Zero Liquid Discharge and Almost Zero Fresh water intake for process use.

Waste water Purification is based on Vaporisation and distillation without use of steam, thermic fluid, Electrical heating of any kind of heat source.

Mizu uses modern and highly energy efficient Mechanical Vapour Recompression technology for waste water purification, requires only electrical energy for operation. No need of Boiler and cooling and condensing section for heat generation and its dumping.

Specifications & features

Heat Exchangers of Falling Film

Special feature of Mizu’s MVR vaporiser is its Falling Film Type Oval Channel Heat Exchanger which offers high heat transfer coefficient with minimum internal losses.

Agitated Thin Film Drier and Paddle Drier

Mizu Developed ATFD and Paddle drier to attain zero liquid discharge and recover to dissolved and suspended solids in order to use recycle or dispose recovered salts in nature friendly manner.

Stripper Columns

To minimize contamination of Volatile solvent in purified water, Mizu developed multistage stripping technology. It can be used prier to sending waste water in MVR vaporiser and after getting distilled condensate or both depends on nature of volatile.

Clean water recovery almost 100% present in Effluent
Clean water TDS below 100
ZLD with 100% clean water recycling along with efforts of recovered dissolved solids regeneration & recycling

Beneficts

  • No external heat source
  • No heat rejection unit
  • No chemical treatment
  • No RO/No membrane
  • No ground water extraction
  • 100% clean water recovery and recycling
  • Minimal electric power demand
  • Evaporation at low ΔT
  • Single step solution in closed loop
  • Lowest foot-print area
  • High quality product
  • Automated operation
  • Low capital cost
  • Minimum operational and maintenance cost
  • Eco-friendly
  • Wide applicability